Material Specification for a Solar Powered Farm Electric Fences in Kenya
There are various components of an electric fence that are joined together to come up with an electric fence system. A farm electric Fences in Kenya will most likely use treated wooden posts or in cases where the soil is too wet or there is a large infestation of termite, steel posts can be used.
Treated Wooden Posts-strainers for use on Electric Fences in Kenya
- Pressure treated in copper chrome arsenate (CCA){tanalith}C to the chemical penetration of at least 1 inch (25mm)
- Size to be at least 5-6 Inches diameter, length 10 feet
- Knot-free and split free
- Bound at top and bottom by a hoop iron 25mm wide and stapled by 1-inch staple nail.
Wooden Posts – line posts as used on solar-powered electric fences
- Pressure treated in copper chrome arsenate (CCA){tanalith}C to the chemical penetration of at least 1 inch (25mm)
- Size to be at least 4-5 Inches in diameter, length 9 feet.
- Knot free and split-free.
- Bound at top and bottom by a hoop iron 2.5mm wide and stapled by a 1-inch staple nail.
Straightness
- A straight line from the centre of the butt to the centre of the tip shall be entirely within the body of the post
Chemical penetration
- The minimum thickness should be 25mm thickness as observed at each end of the post.
Dimensions
- Strainer posts 10 Feet
- Line posts 9 Feet
Banding
- The top and bottom end of each post shall be tied with 25mm wide hoop iron.
Allowed defects
- Posts should be of sound wood free from decay, insect attack, rot and any damage caused by handling and processing.
Electric Fencing Wires in Kenya
Galvanised Plain Fencing Wire
- High tensile steel wire of steel class BS 1044 or BS 1065.
- The size for live and earth wires shall be 2.5mm in diameter with a tolerance of 0.02mm.
- Tensile strength of 1200-1400N.
- Weight of zinc coating of not less than 350gm/m2.
- Gauge 12.5
Soft Wire / Stay wire (Mild steel wire).
- Weight of zinc coating of not less than 350gm/m2
- Size shall be 4.0mm2 diameter mainly used for stay and cross wire on a Strainer assembly.
- Tensile strength of not less than 500N
Plain Wire 1.6mm High Tensile Steel Wire
- High tensile steel wire of steel class BS 1044 or BS 1065
- The size for live and earth wires shall be 1.6mm in diameter with a tolerance of 0.02mm.
- Tensile strength of 1200-1400N
- Weight of zinc coating of not less than 350gm/m2.
Lead wire (Under gate cables) for use on Electric Fences in Kenya
- Double insulated in tough polyethylene insulating material
- Lead wire of 1.6mm2 or 2.5mm2 diameter
- Aluminium lead wire.
- Resistance of less than 350 ohms per km
- Greater than 20KV Insulation
Nails
- Staples Nails (U-nails).
- Hot dipped galvanized wire nails.
- Long shank.
- 2 inches long.
- 4mm wire gauge.
Wire Nails (5″ Building nails)
- Hot dipped galvanized wire nails.
- Long shank.
- 5 inches long.
Line Insulators/ W-Insulators
- Polyethene material.
- Open-face for good drainage.
- With holes for anchoring staples.
- Made of UV-protected polyethene material.
- Strong jaws to withstand large horizontal and vertical movements.
Buy W’s Insulators HERE on our online shop.
Strain end Insulators
- Bull nose type
- Porcelain material
- Fire resistant
- Long tracking distance
- A high-quality white glaze finish
Corner and Line Insulator
- Reel round Insulator
- Porcelain material
- Fire resistant
- High-quality glaze finish
Solar Powered or Mains Electric Fence Energizers in Kenya
- A modular solar-powered electric fence energizer machine.
- At least 16* joules stored energy. *Rating depends on the acreage or perimeter length of the farm.
- In-built lightning protection.
- Remote ON/OFF operation capability.
- With status LED.
- Capable of integration with: –
- Alarm system or SMS Module/controller.
- Remote and faultfinder
- Fence monitor.
LIGHTNING DIVERTER / ARRESTER
- At all places where energizers are installed, there shall be a lightning diverter.
- The standard lightning diverter is completed with a spiral wire earthing system connection.
- Able to divert multiple lightning strikes to the ground (earth).
EARTH PEG
- 2mx20mm diameter GI pipe class C.
- With a heavily galvanized Joint clamp 200mm below the upper tip.
SOLAR PANEL
- 150Watts Solar Panels.
- Maximum Power (Pmax) ≥ 150 Watts.
- The voltage at Pmax (Vmax) ≥ 17.5V.
- Current at Pmax (Imax) ≥ 7.43A.
- Short-circuited current (Isc) ≥ 8.44A.
- Open circuit voltage (Voc) ≥ 22.0V.
- No of cells ≥ 36.
- Monocrystalline or Polycrystalline photovoltaic Solar Modules.
- Operating temperature – 40°C to 85 °C.
- Factory installed by-pass /blocking diodes in the solar module.
SOLAR POWER BATTERY
- Lead Acid Flooded Solar Battery.
- Battery Capacity – 12V / 100Ah Lead Acid Flooded / Gel with catalyst Battery at C20 Rating.
- Deep Cycle Solar Battery Technology.
- Dry Charged / Maintenance free.
- Plate Design – Tubular Plates.
CHARGE CONTROLLER / REGULATOR
- 12V /30A Solar Charge Controller with LCD display / Digital Meter that will
- display charging / Load Current, Battery / Solar Voltage
- System Voltage =>12V / 24V Auto-detect
- Maximum Output Current => 30A Continuous Rating
- Electronic Protections => Reverse Current at Night
- Charging Regulation => Bulk, Absorption, Float, Equalize
- Operating temperature => – 40°C to +60°C
HATARI / DANGER WARNING SIGNS For ELECTRIC FENCES IN KENYA
- Made of UV-protected material
- Size 250mmx150mmx1mm
- Bright yellow in colour
- Inscription written in black “ELECTRIC FENCE”
- Eligible with lettering not less than 25mm in height
- A legal requirement for all electric installations
JOINT CLAMPS
- Made of Aluminium or Mild steel.